As you become more advanced at skiing, the length can line up more with the top of your head. However weight is an important factor too. As is the type of ski you are buying. For some the right length for you might be different between different skis. Remember, this is a general rule and several other factors should be taken into account. For example a skier on the heavier side will want to go a little longer and someone who is lighter than normal will want to go a little shorter.
Another important specification to look at when choosing a beginner ski is the waist. The waist is the width of the ski in the middle of the ski, usually the narrowest portion. Instructors recommend a narrow waist for beginners, as turning will be easier compared to a ski that has a wide width.
An unofficial, but pretty reliable, measurement for beginner waist is between 70 mm to 85 mm. First, a few quick definitions. Rocker is basically when the ski bends up, usually either at the tip or tail or both. Camber is the arched shape of the ski. In a traditional cambered ski, almost the entire ski is cambered, so that there is a pronounced arch for most of the length of the ski.
This gives a nice spring to turns, and it also helps hold long, fast carving lines. Traditional camber is not good for beginner skiers. You are not looking to go as fast as you can, or to draw out aggressive carves in your first few experiences on the mountain. Drill-Mounted Bindings As the name suggests, drill-mounted bindings are drilled and glued onto the ski making them a permanent fixture.
This is done professionally in a ski shop or you can get them mounted in resort if you need to also. What Type of Skier Am I? Rigidity: Go for mid-range rigidity for the perfect all-rounder ski. Weight: A light flexible ski is always best for beginners but choosing an average weight ski will take you happily through the powder in January to the different ski types all the way through to the end of the season.
Free Rider Length: Go for mid-length freerider skis if you prefer untouched snow and usually avoid the smooth grooming pistes in resort. Those who love freeriding will need quite big skis with a blade wider than 90mm. Rigidity: Just like with skis made for downhill skiing, the best rigidity for skis to be used mainly freeriding will be dictated by your standard, physical condition and what you want to achieve.
Rigid skis with a normal camber and flat tail will give you more speed and stability, whereas skis that are more flexible and have a reverse camber will be a lot more fun.
Weight: Light flexible skis are best for those buying their first pair of skis, and will prove more easy to throw around a park if you like freestyling too. Skis with Bindings are called system skis. System skis have a plate that the binding is affixed to that improves the flex of the ski by eliminating dead spots underneath the mounting platform.
System skis are typically groomer and on trial skis due to their more narrow waists. Skis without Bindings are called flat skis. Flat skis are typically all mountain, all mountain wide, freestyle or powder skis. Wider bindings improve the torsional strength of the ski.
Bindings now have a wider mounting platform that decreases the amount of leverage it takes to tip the ski on edge. A ski's waist width directly correlates to the condition that you will mostly be skiing in. Skis with skinnier waists are quicker edge to edge, better for on trail carving and easier to maneuver for a new or beginner skier.
The wider the ski is underfoot, the more float you get in the powder and the more stability you get in the crud and broken snow. The more time you spend off-trail, the wider your skis should be. Skis under 85mm are best suited for skiers that will be spending just about all of their time on the groomed trails.
This waist width can range from beginner all the way up to expert and everything in-between. High-powered carving skis for experts usually have a waist width around mm which makes the ski very agile, yet wide enough to go through the crud that pops up on the groomers. Skis for beginners are in this waist width that will make them lighter and easier to control while learning. Skis mm are primarily used for on-trail skiing but have the ability to spend some time off the groomers in the right snow conditions.
They have maneuverability on and off the trail and versatility so you can spend time in the powder. Skis mm are the ideal all mountain waist width for skiers seeking true versatility. They make medium to long radius turns on the groomers with ease and have the ability to float in all but the absolute deepest of powder and we hope you get those days. Ultra wide waist widths provide you with the most floatation in the deep powder and the most stability when things get cruddy or bumpy.
They are not the most agile ski for making short quick turns on the groomers but are easily manageable for making your way back to the lifts for another lap. Rocker is the slightly bent up or reverse camber shape that lifts off of the ground when the ski is laying flat on the ground. Rocker makes the ski more maneuverable by engaging the tip of the ski into a turn quicker and easier.
It also helps you float to the top of the ski just like a water ski does. Snow is a three dimensional medium, just like water. Having your skis on top of the snow makes it much easier for you to keep up speed, suffer less fatigue, turn and enjoy the powder.
Rocker also absorbs negative vibrations that can be caused by bumps or crud. Think of a traditionally cambered ski as a loaded spring - when you hit the variations in the snow, the cambered tip will send those vibrations through the ski, back through the binding, past the boots and to your body.
A rockered ski will absorb those vibrations rather than sending them to your body. Rocker is here to stay. Now some form of rocker exists in almost every type of ski, no matter what the intended use is. Rocker gives you more maneuverability and the extra length improves your stability.
Cambered skis have the most traditional shape with the center of the ski raised when the ski is laying flat on the ground un-weighted.
You have control carving on icy pistes and steep terrain and are confident riding a variety of snow conditions and terrains. The width of your skis will contribute to how it feels and performs. The measurement is taken from the middle of the ski, usually at the narrowest point. Narrow widths will offer a quicker turn, while wider waist widths offer better flotation in powder.
The turn radius will also contribute to how your skis feel and perform. The turn radius is given in metres.
Skis with a shorter turn radius are suitable for all mountain and some powder skis with tapered tips and tails. Carving skis often have a shorter turn radius and are good for quicker turns. Skis with a long turn radius are good for powder and big mountain skiing, turning more slowly and usually more stable at high speeds.
The camber profile is the curvature of the base of a ski, with different profiles suiting different styles of skiing. These vary slightly by brand, but below is a rough guide to the different camber profiles.
Traditionally skis are cambered, giving them an upward arching curve in the middle to help distribute pressure evenly across the length of the skis.
Cambered skis ask for a more precise turn but give maximum energy on groomed pistes and hard snow, as well as good edge hold and pop. A rocker, also known as reverse-camber, is a camber turned upside down. Ideal for both beginner and advanced riders, the rise of the tip and tail away from the snow results in easier float in deeper powder.
0コメント